Zinsser AllCoat Interior & Exterior Satin Paint - Ready Mix Colour

From £16.99 £14.16
In Stock

A water-based self priming paint that leaves a quality satin finish. Can be used on a variety of different surfaces

Mixed to a wide range of colours including most major brands, simply enter the name and brand of the colour you would like, or select from the colour palette above to get your perfect colour.

Zinsser AllCoat ® Exterior Satin is an interior & exterior ultimate performance mould resistant all surface paint. Designed for the long term decoration of timber, metal, masonry, plastic, concrete, cladding and more, it forms a vapour-permeable, low maintenance water-shedding coating, re-coatable in 1 hour.

A self priming, water based paint, the Zinsser AllCoat Satin can be applied to previously painted surfaces without any sanding. Providing up to 12m2 per Litre of coverage and touch dry within 30 minutes, the Allcoat Satin provides excellent colour retention and resistance against cracking, blistering and flaking. Applying two coats of Zinsser Allcoat Exterior will ensure that your surfaces look bright and beautiful for years.

Available in paint tin sizes of 1L, 2.5L and 5L.

Application & Coverage

Always shake or stir your paint well before using and apply with a synthetic brush, roller or sprayer. Avoid painting in direct sunlight and maintain a 'wet edge' to avoid lapping from occurring.

Key Product Features

  • Scrubbable – Class 1 Wet Scrub Rating (ISO 11998)
  • Easy application self-priming system
  • Fast recoat time 1 hour
  • Long lasting finish
  • Typically available for next day delivery
  • 15 Years Protection

Product Finish: Satin

Washability: Scrubbable

Years of Protection: 15

Coverage (m2) per Litre: 12

Brand: Zinsser

Paint Application: Brush, Roller, Spray, Pad

Suitable Substrate: Interior Woodwork, Exterior Woodwork, Metal, Plastic, uPVC

Drying Time: 1 Hour

Technical Data: Click Here

Safety Data Sheet: Click Here

Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.

New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting. To effectively remove mould and mildew, dirt and chalky paint residue, use a proper fungicidal wash or exterior house cleaner following the manufacturer’s instructions. Timber at risk from decay or insect attack should be treated with an appropriate preservative.

Ensure the surface is completely dry before painting, for porous surfaces such as timber or masonry, we recommend moisture content of the substrate should not exceed 12%.

Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure. Ensure air and surface temperature are between 10° & 32°C and humidity is less than 85% during application and cure of the product.

Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping. Ensure conditions during application and cure are favourable, do not apply if there is a likelihood of rain, frost, fog or condensation affecting the freshly applied paint before it has fully cured.

There are no reviews available for this product right now

To read our full delivery information please click here.

 

Delivery Options & Charges for mainland UK:

Service Cost Lead Time
Standard Delivery £5.95 (Free over £60) Delivery in approximately 2 working days.
Next Day Delivery £7.99 (Free over £100) Delivery the next working day when ordered before 2pm Mon-Thurs.
Next Day before 12 £12.99 Delivery the next working day before 12 when ordered before 2pm Mon-Thurs.
Next Day before 10:30 £18.99 Delivery the next working day before 10:30am when ordered before 2pm Mon-Thurs.
Saturday Delivery £10.99 Order before 2pm Friday for Saturday Delivery
Sunday Delivery £10.99 Order before 3pm Friday for Sunday Delivery
Wallpaper Sample Delivery £0.99 Dispatched same day when ordered before 2pm. Delivery is typically two working days, but can take longer.

 

Delivery Options & Charges for More Remote Areas:

Service Cost Lead Time
Scottish Highlands (Includes some AB postcodes) £12.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.
Northern Ireland  £12.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.
Isle of Wight & Isle of Man £16.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.

 

Brand specific delivery options

Manufacturer Cost Delivery Information
Laura Ashley Standard rates Standard Delivery takes approximately 3-5 working days and Next Day delivery is available for UK mainland and Northern Ireland on orders before 1pm.
Laura Ashley Samples Free Sample Delivery Shipped with Royal Mail and can take approximately 2-10 working days. 
Rust-Oleum Standard rates Rust-Oleum products are only available on standard delivery as these are processed and shipped from a separate warehouse. Up-to-date delivery estimates are provided at checkout.
Rust-Oleum Tester Sachets Free Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. 
Holden Standard rates Takes approximately 2 working days. 
Pagazzi Standard rates Takes approximately 1-2 working days. 
NMC £22.99 Processed and shipped direct from the manufacturer via DHL. Takes approximately 2-5 working days. 

 

Related products

Loading...
Loading...