Barrettine Paint Panther Paint & Varnish Remover

Shake/stir well before use. Optimum working conditions are between 5-25°C. Do not apply to more than ~0.5m2 at a time, as the product will evaporate before full stripping is possible. If the product evaporates, the coatings below will begin to harden again.

Decant a small amount of the product into a suitable non-plastic container and replace the cap. A clean, empty jam jar is a good makeshift option. Apply Paint Panther liberally using a clean brush, by dabbing onto the surface. Do not spread too thinly, as this will reduce the working time of the product.

Wait 10-15 minutes, in which time many coatings will begin to blister. Test a small area with a shave hook or stripping knife for ease of removal. If required, work in further then apply additional product, rubbing it well into any blisters which have formed. Allow to penetrate for an additional 10-20 minutes, monitoring closely to ensure the product is not permitted to dry out, before removing. A stiff bristled brush can be used for removal in intricate areas.

Collect stripping waste on an appropriate surface such as old newspaper and leave in the open air to dry for several hours. After this, dispose of as waste coatings/paints following your local authority’s recommended disposal route. Reapply as necessary to remove all coatings.