Deltec Extreme Red Masking Tape

An ideal masking tape for slightly rough and wet surfaces such as masonry or smooth render, the Deltec Extreme Red Masking Tape is available in 1", 1.5" & 2" rolls 50m in length. Leaving sharp crisp edges for a professional finish, it's easy to see why Deltec are many decorator's first choice of tape.

The Deltec Extreme Masking Tape can be used both indoors or outdoors and is UV resistant for up to 4 months and up to temperatures of 100°C. Never leaving any glue residue behind after removal, this masking tape does not require any clean-up after use.

Deltec Extreme Red Masking Tape Key Features: 

• No paint bleed
• Suitable for interior and exterior use
• UV resistant for 4 months
• Ideal for slightly damp and rough surfaces
• Never leaves glue residue
• 50m roll length

How to apply and remove Deltec Extreme Red Masking Tape

Before you begin, ensure that your surface is clean, dry and free from any dust. Next, apply your Deltec masking tape in long strips ensuring that you leave enough tape at the end of each strip to overlap the edges of the next section. Remember to apply your masking tape as close as possible to the surface, pressing firmly down to make sure it’s properly stuck on.

When it come to removing your Deltec tape, peel the masking tape off carefully, pulling it slowly but firmly. If any of the paint has dried onto the masking tape, score the area using a sharp utility knife to remove.