Zinsser Peel Stop Bonding Primer

Zinsser Peel Stop is a clear, flexible bridging sealer for surfaces where peeling, flaking, dusting or chalking is a problem.

Suitable to be used both indoors or out to form a breathable membrane over questionable or faulty substrates. Peel Stop tightly bonds to old paint and problem areas forming a sound surface for new paint and helps to form a tough acrylic film that stays flexible and helps prevent peeling by letting moisture escape. A clear sealer, Zinsser Peel Stop works like nothing else to stop peeling problems on old or new surfaces.

Recommended for various uses, Zinsser Peel Stop helps to prevents peeling, blistering, checking, cracking and flaking on wood siding and trim, yellow pine, rough sawn cedar, textured plywood, chalking or powdering, concrete and concrete block, stucco and galvanized gutters.

Key Features of Zinsser Peel Stop Primer

• Use on a variety of surfaces
• Bonds to form a sound surface
• Recoatable in 2 hours
• Flexible & breathable
• Suitable for interior and exterior use
• Quick clean up with soap and water

Why Should You Use Zinsser Peel Stop?

When applied over cracked or checked surfaces, Peel Stop acts as a flexible bridging primer to seal face checking and prevent the finish coat from cracking, providing a sound surface for primer and paint.

Being water-based and clear, the latex formulation is extremely quick and easy to clean up after use with soap and water.

Providing up to 9m² per litre of coverage, this Zinsser bonding primer has a drying time of 1 hour and is recoatable within 2 hours. Available in a 1L, 2.5L or 5L sized tin.