Repair Care DRY FIX UNI - Wood Stabiliser

Repair Care DRY FIX UNI

"Designed for the pre-treatment of your chosen surface, the Repair Care DRY FIX UNI is a universal wood stabiliser for all DRY FLEX woodcare products"

The Repair Care Dry Fix UNI is a two part component that has been specially designed to be used as a pre-treatment on both your internal and external wooden surfaces.

Suitable for using on both rotten and damaged wood, this universal wood primer gets straight to work by strengthening the wood fibres of your surface.

Also designed to provide maximum adhesion between any DRY FLEX repair product and your wooden substrate, the Repair Care DRY FIX UNI features a low viscosity helping to deliver a deep penetration of the wooden surface.

Easy to apply with a brush, this solvent free wood stabiliser has a quick drying time of 1 hours and only requires 1 coat for optimum results.

How should I apply Repair Care DRY FIX UNI?

Before application of the Repair Care DRY FIX UNI we advise to always follow the manufacturers instructions on the container at all times. Start off by shaking the components of container A well and pouring the contents into the Repair Care EASY.Q mixing cup. (Follow the same process with components B, pouring the contents into the same mixing cup).

Once both components are in the mixing cup, stir together and apply the Repair Care Dry Fix UNI with a brush to your wooden surface allowing a minimum of 20 and a maximum of 45 minutes to penetrate. Once complete, remove any excess product from the surface and apply your DRY FLEX within 24 hours to the pre-treated wood whilst it is still tacky.

For more information on how to apply the Repair Care DRY FIX UNI watch our application video provided.