Free delivery on orders over £60! close

Free delivery on orders over £60! close

Osmo Interior Concrete Oil - 610

From £21.91 £18.26 Regular Price £24.35
10% Off
In Stock
DCO PRO. Professional Decorator?
Lift the lid on exclusive benefits.

Made from a blend of natural oils & waxes, Osmo Concrete Oil - 610 has been designed to use on concrete surfaces and unglazed tiles to provide a beautifully clear satin finish.

Osmo interior concrete oil 610 is made up from a blend of natural oils and waxes which in turn form a microporous and breathable finish on your surfaces which will not crack, peel or blister over time. 

Protecting against dirt and wear, this natural oil wax seal is ideal for using in both bathroom and kitchens and can be used on a number of surfaces including, floors, wall panelling, table tops and window sills. Available in a clear satin finish to enhance the natural surfaces resulting in a warm and rich colour, Osmo concrete oil seal porous tiles ready for grouting by penetrating deep into the substrate leaving a low odour and highly professional finish. 

Osmo Interior Concrete Oil 610 is available in two sizes, including 750ml and 2.5L. 

Key Product Features

  • Highly water repellent - Protects against dirt and wear
  • Microporous, breathable finish which does not crack, peel, flake or blister
  • Made from natural oils and waxes
  • High VOC

Product Finish: Satin

Coverage (m2) per Litre: 50

Brand: Osmo

Paint Application: Brush, Roller, Pad

Suitable Substrate: Concrete

Interior Exterior: Interior

Drying Time: 8-10 Hours

Item Code: 610

Technical Data: Click Here

Safety Data Sheet: Click Here

The surface must be absorbent, clean, dry and frost free. Any existing sealants must be completely removed using a suitable tile or stone sealant stripper. Please contact the manufacturer of the sealant stripper for more guidance on the most appropriate products available. Rinse the surface well after stripping sealants. Following the stripping of sealants, the surface will need to dry for at least 7 days in well ventilated, liveable conditions. Newly laid stone or absorbent tiles will also need to dry for at least 7 days in well ventilated, liveable conditions. For concrete slabs, ensure the slab has completely dried  – this could take several weeks depending on thickness. Osmo Concrete Oil is ready to use; do not thin. A trial application is highly recommended first. Stir well.

With Osmo Flat Brush, Floor Brush, Oil Finish Applicator Fleece (Hand Pad Holder) or Osmo Microfibre Roller, apply very thinly and spread well. Remove any excess wet product (pooling or streaks) with a pad or a lint-free cloth. For larger areas, remove excess oil with a rubber scraper and polish with a buffing machine (white pad). Important: the liquid oil must be absorbed into the surface. There must not be any oil left on the surface. Allow to dry for 8-10 hours. Ventilate well while drying. Apply the second coat also very thinly. Again, remove any excess. When renovating already oiled surfaces, normally one coat on a cleaned surface is sufficient.

Regular Cleaning: Dust mopping using the green Dust-Mop from the Osmo Mop Cleaning Kit for Floors. Damp mopping using Osmo Wash and Care or Osmo Spray-Mop.

Occasional Maintenance:  Refresh clean, dry surfaces using a little amount of Osmo Concrete Oil 610 applied with a lint free cloth.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

There are no reviews available for this product right now

To read our full delivery information please click here.

 

Delivery Options & Charges for mainland UK:

Service Cost Lead Time
Standard Delivery £5.95 (Free over £60) Delivery in approximately 2 working days.
Next Day Delivery £7.99 (Free over £100) Delivery the next working day when ordered before 2pm Mon-Thurs.
Next Day before 12 £12.99 Delivery the next working day before 12 when ordered before 2pm Mon-Thurs.
Next Day before 10:30 £18.99 Delivery the next working day before 10:30am when ordered before 2pm Mon-Thurs.
Saturday Delivery £10.99 Order before 2pm Friday for Saturday Delivery
Sunday Delivery £10.99 Order before 3pm Friday for Sunday Delivery
Wallpaper Sample Delivery £0.99 Dispatched same day when ordered before 2pm. Delivery is typically two working days, but can take longer.

 

Delivery Options & Charges for More Remote Areas:

Service Cost Lead Time
Scottish Highlands (Includes some AB postcodes) £12.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.
Northern Ireland  £12.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.
Isle of Wight & Isle of Man £16.99 Up-to-date delivery dates are provided at checkout. Takes approximately two working days.

 

Brand specific delivery options

Manufacturer Cost Delivery Information
Laura Ashley Standard rates Standard Delivery takes approximately 3-5 working days and Next Day delivery is available for UK mainland and Northern Ireland on orders before 1pm.
Laura Ashley Samples Free Sample Delivery Shipped with Royal Mail and can take approximately 2-10 working days. 
Rust-Oleum Standard rates Rust-Oleum products are only available on standard delivery as these are processed and shipped from a separate warehouse. Up-to-date delivery estimates are provided at checkout.
Rust-Oleum Tester Sachets Free Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. 
Holden Standard rates Takes approximately 2 working days. 
Pagazzi Standard rates Takes approximately 1-2 working days. 
NMC £22.99 Processed and shipped direct from the manufacturer via DHL. Takes approximately 2-5 working days. 

 

Related products

Loading...
Loading...