Crown Trade Satin - White

Timber and Timber Based Boards (Including MDF)

All surfaces must be suitably dry, and free from anything that will interfere with the adhesion of the materials to be applied. Fill any fixing holes, open joints and shallow surface defects with Sandtex Trade Ready Mixed Filler or a two pack proprietary wood filler. Rub down with a suitable grade of abrasive paper and round sharp edges 1-3mm. Remove all dust. Treat knots with two thin coats of fresh knotting. Prior to priming the moisture content of the substrate should not exceed 18% wood moisture equivalent. Prime with one coat of Crown Trade Wood Primer as required. Apply one coat of Crown Trade Full Undercoat.

Hardwoods with a high tannin content should be scrubbed and swabbed with clean methylated spirits, frequently changing the face of the cloth. Allow to dry and prime with a coat of Crown Trade Aluminium Wood Primer.

All metals including galvanised

Surfaces must be clean and free from anything that will interfere with the materials to be applied. Remove all millscale and corrosion back to clean metal. Remove all residues. Wash with hot water and liquid detergent solution to remove oil, grease or any other contaminants, frequently changing the water. Rinse thoroughly with clean water. Allow to dry. Lightly abrade non-ferrous metals to a bright (not polished) surface – excluding galvanised surfaces. Bright galvanised surfaces should be pre-treated with Crown Trade Protective Coatings T-Wash after washing. Overall blackening of the surface will confirm satisfactory surface preparation. 

Prime within the working day with one coat of Crown Trade Universal Metal Primer. Apply
one coat of Crown Trade Full Undercoat.