Barrettine Peelaway 1 Neutraliser - 1L

The Barrettine Peelaway 1 neutraliser is an concentrated liquid compound that has been purposely designed to neutralise your alkaline surfaces after the application of Barrettine Peelaway 1.

An important step to remember in the Peelaway 1 application process, the residue of Peelaway 1 may bleed from more porous surfaces such as wood, stone and plaster and raise the PH level which could effect the surface material itself and the overall finish. Suitable for both exterior and interior use, the Barrettine Peelaway 1 neutraliser can be simply applied through following the below steps:

• Pour diluted neutrailiser into a handheld sprayer and ensure that all Peelaway 1 residue has been removed before beginning.
• Start at the top and spray the entire surface until it has been fully saturated.
• Application by spray only to avoid contamination, but sturdy substrates can be scrubbed afterwards to increase effectiveness.
• Leave the Peelaway neutrailiser until it is touch dry (min of 6 hours) and rinse neutraliser where possible to remove neutralised salts.
• Once the surface has fully dried, moisten an area with water and carry out a PH test to ensure level is correct.