This site uses data saved in the cookie files and other technologies. If you agree to use cookie files click 'Allow Cookies'. Otherwise, click 'Cookie Settings' to allow or prohibit some cookie categories.
10% off all wallpaper, limited time only. No code required! close
Use the options below to customise your experience on the site.
If you are new to Decorating Centre, simply click register and we'll ask you for a few details.
For businesses, sign up to our trade account.
10% off all wallpaper, limited time only. No code required! close
10% off all wallpaper, limited time only. No code required! close
A professional quality solvent based exterior paint that offers up to 15 years of protection. Available to tint, the solvent based AllCoat Satin retains the colour brilliantly and can be used on most exterior surfaces.
The paint is self-priming so most jobs will not require a primer with no sanding required. The first coat you apply will act as the primer and the second will be the topcoat. The topcoat will seal the surface making it extra durable and it can be applied in temperatures as low as 5°C and is shower resistant after 1 hour.
Once applied, it creates an extremely tough finish that resists flaking, cracking and blistering. This is due to the water shedding, vapour-permeable coating it provides which gives it the long lasting protection.
The Zinsser Allcoat is made with a biocide that is formed to protect it against fungal degradation and unwanted mould giving you a better quality finish for longer. The Solvent based Allcoat leaves a fantastic looking finish and dries in temperatures as low as 5°C.
It is ideal to be used on surfaces such as wood, metal, UPVC, steel, aluminium, cladding, masonry and much more. It can take up to 7 days to fully cure but can be recoated in as little as 3 days.
Available in 1L, 2.5L & 5L sized paint tins.
Application & Coverage
Surfaces must be clean, sound and free of dirt before application. Stir well before using, normal application is 2 coats, however an additional coat should be applied to areas of high exposure such as sills and fascia boards. Suitable to be applied with roller, brush and airless sprayer.
Key Product Features
Product Finish: Satin
Years of Protection: 15
Coverage (m2) per Litre: 10
Brand: Zinsser
Base: Solvent
Paint Application: Brush, Roller, Spray
Suitable Substrate: Exterior Woodwork, Metal, uPVC, Exterior Masonry, Concrete, Brickwork
Drying Time: Recoat after 3 Hours, Hard Dry 16 Hours
Tintable: Yes
Technical Data: Click Here
Safety Data Sheet: Click Here
Surfaces should be clean, dry, sound and free of any contamination that may interfere with adhesion. Remove all loose or peeling paint and chalky paint residue. Sand edges of any remaining paint film until smooth. Special precautions should be taken during surface preparation of pre-1960 paint surfaces as they may contain harmful lead. Avoid the inhalation of dust. Wear a suitable face mask if dry sanding.
New concrete, masonry and other related surfaces must be cured at least 30 days before priming. Remove all existing mould and mildew before painting. To effectively remove mould and mildew, dirt and chalky paint residue, use a proper fungicidal wash or exterior house cleaner following the manufacturer’s instructions. Timber at risk from decay or insect attack should be treated with an appropriate preservative.
Ensure the surface is completely dry before painting, for porous surfaces such as timber or masonry, we recommend moisture content of the substrate should not exceed 12%.
Shake or stir well before using. Apply with synthetic bristle brush, roller or sprayer. For airless spraying, use a .017” tip and high-medium (2000-2500 PSI) pressure. Ensure air and surface temperature are between 10° & 32°C and humidity is less than 85% during application and cure of the product.
Avoid painting in direct sunlight and maintain a “wet edge” to avoid lapping. Ensure conditions during application and cure are favourable, do not apply if there is a likelihood of rain, frost, fog or condensation affecting the freshly applied paint before it has fully cured.
To read our full delivery information please click here.
Delivery Options & Charges for mainland UK:
Service | Cost | Lead Time |
Standard Delivery | £5.95 (Free over £60) | Delivery in approximately 2 working days. |
Next Day Delivery | £7.99 (Free over £100) | Delivery the next working day when ordered before 2pm Mon-Thurs. |
Next Day before 12 | £12.99 | Delivery the next working day before 12 when ordered before 2pm Mon-Thurs. |
Next Day before 10:30 | £18.99 | Delivery the next working day before 10:30am when ordered before 2pm Mon-Thurs. |
Saturday Delivery | £10.99 | Order before 2pm Friday for Saturday Delivery |
Sunday Delivery | £10.99 | Order before 3pm Friday for Sunday Delivery |
Wallpaper Sample Delivery | £0.99 | Dispatched same day when ordered before 2pm. Delivery is typically two working days, but can take longer. |
Delivery Options & Charges for More Remote Areas:
Service | Cost | Lead Time |
Scottish Highlands (Includes some AB postcodes) | £12.99 | Up-to-date delivery dates are provided at checkout. Takes approximately two working days. |
Northern Ireland | £12.99 | Up-to-date delivery dates are provided at checkout. Takes approximately two working days. |
Isle of Wight & Isle of Man | £16.99 | Up-to-date delivery dates are provided at checkout. Takes approximately two working days. |
Brand specific delivery options
Manufacturer | Cost | Delivery Information |
Laura Ashley | Standard rates | Standard Delivery takes approximately 3-5 working days and Next Day delivery is available for UK mainland and Northern Ireland on orders before 1pm. |
Laura Ashley Samples | Free Sample Delivery | Shipped with Royal Mail and can take approximately 2-10 working days. |
Rust-Oleum | Standard rates | Rust-Oleum products are only available on standard delivery as these are processed and shipped from a separate warehouse. Up-to-date delivery estimates are provided at checkout. |
Rust-Oleum Tester Sachets | Free | Free sachet delivery is available on all Rust-Oleum sachets. These are shipped direct from the manufacturer using Whistl. Can take 5-10 working days. |
Holden | Standard rates | Takes approximately 2 working days. |
Pagazzi | Standard rates | Takes approximately 1-2 working days. |
NMC | £22.99 | Processed and shipped direct from the manufacturer via DHL. Takes approximately 2-5 working days. |