Tikkurila Optiva Nature Matt 5 for Walls and Ceilings - Colour Match

Brand: Tikkurila

Drying Time: Recoatable after 2 hours

Coverage (m²/litre): 8

Unpainted surfaces:
New plaster and concrete substrates can be painted after 4 weeks of seasoning. Clean these surfaces from dust and dirt, smooth out irregularities and losses with putty. Gypsum boards, cardboards and putty may be painted after they are fully dry. In case when unevenness of the surface is considerable, the wall should be even with leveling mortar and afterwards apply on the whole surface smooth putty. In case of small unevenness you may apply smooth puttyat once. The use of above mentioned mortars and putty should be done according to data sheets of these products. Machine plaster with visible glossy sinter surface should be sanded and clean from dust. Then apply one coat of Tikkurila Optiva Primer.

Previously painted surfaces:
Wash the surface before coating and remove grease and dirt and loose and flaking fragments of old coat. Sand glossy surfaces and smooth out irregularities and losses with putty. Paint with gloss grade: satin, semi-matt, semi-gloss and gloss should be sanded on the whole surface before final dusting. For sanding use sanding paper with grain 150-200. Prime the whole substrate with Tikkurila Optiva Primer. The priming can be omitted only if the existing coating is perfectly preserved (the producer is not responsible for the incorrect assessment of the actual substrate).

Surfaces painted with glue or lime paint:
Remove the lime or glue paint thoroughly. Clean the surfaces from dust and dirt, smooth out irregularities and losses with putty. Then apply one coat of Tikkurila Optiva Primer. In case of loose substrate prime with Tikkurila Suprabilit.

Before application thin sufficient amount of paint from one production batch to avoid possible colour difference. Before painting stir
the paint thoroughly. Depending on substrate porosity apply 2 coats of Tikkurila Optiva Nature Matt [5] with brush, roller or spray.
For colours of particularly weak hiding power (marked within the tinting system) it may be necessary to apply additional coats. In
case of applying colours marked in tinting system as weakly hiding (LH) and intensive colours from C base, it is recommended to
use priming paint Tikkurila Optiva Primer tinted to a colour close to the colour of finishing paint. The painting tape should be
removed immediately after painting, before the paint will dry. It is recommended to use ANZA painting tools.

All surfaces intended for coating must be dry, air temperature may not be lower than +5°C and not higher then +25OC, relative air
humidity below 80%.

Delivery Options & Charges for More Remote Areas
Delivery to these remote postcodes may take a little longer and we’re unable to offer our express delivery services to these areas. Our team will prioritise your order to ensure it is delivered to you as soon as possible.

Brand specific delivery options

Orders for products from these manufacturers may be shipped separately and delivery times vary. Please see below for more information.

If any part of your order is temporarily out of stock and dispatch is anticipated to be delayed at all, we will contact you by e-mail to notify you of the new anticipated delivery date. If possible we will split your order so you receive goods in stock in a timely manner. Larger orders may be separated into multiple consignments by DPD but these will all be delivered by your estimated delivery date. 

Returns